Plik:Pocket Watch Balance Wheel.jpg

Rozmiar pierwotny(1612 × 1612 pikseli, rozmiar pliku: 287 KB, typ MIME: image/jpeg)

Opis

Opis
English: A bimetallic temperature compensated balance wheel from an early 1900s pocket watch. 1.8cm diameter. The rim is made of two bimetallic semicircular arms, composed of a layer of brass on the outside fused to a layer of steel on the inside. As the temperature increases, the arms bend slightly inward, causing the balance to oscillate faster, to compensate for the thermal loss of elasticity of the spring. Moving opposing pairs of weights nearer the ends of the arms (1) increases temperature compensation. Unscrewing pairs of weights near the spokes (2) slows the oscillation rate.
Data
Źródło Praca własna
Autor Chris Burks (Chetvorno)
Licencja
(Ponowne użycie tego pliku)
I, Chris Burks, release this image into the public domain for any use whatever.

Licencja

Public domain Ten utwór został udostępniony jako własność publiczna przez jego autora, I, Chris Burks (Chetvorno). Dotyczy to całego świata.
W niektórych krajach może nie być to prawnie możliwe, jeśli tak, to:
I, Chris Burks (Chetvorno) zapewnia każdemu prawo do użycia tej pracy w dowolnym celu, bez żadnych ograniczeń, chyba że te ograniczenia są wymagane przez prawo.

Podpisy

Dodaj jednolinijkowe objaśnienie tego, co ten plik pokazuje

Obiekty przedstawione na tym zdjęciu

przedstawia

Historia pliku

Kliknij na datę/czas, aby zobaczyć, jak plik wyglądał w tym czasie.

Data i czasMiniaturaWymiaryUżytkownikOpis
aktualny18:41, 19 cze 2007Miniatura wersji z 18:41, 19 cze 20071612 × 1612 (287 KB)Chetvorno{{Information |Description=A bimetallic temperature compensated balance wheel from an early 1900s pocket watch. 1.8cm diameter. The rim is made of two bimetallic semicircular arms. As the temp. increases, they bend inward, causing the balance to oscill

Następujące strony korzystają z tego pliku:

Globalne wykorzystanie pliku

Ten plik jest wykorzystywany także w innych projektach wiki:

Metadane